Exaustor de gama de filtro de carbono ativado, mini exaustor móvel de aço inoxidável sem dutos, exaustor de ácido hidroflúrico
Visão geral Tamanho do pacote 1900,00 cm * 900,00 cm * 2100,00 cm Peso bruto do pacote 360,000 kg Descrição do produto A
Overview Informação básica.
| Modelo NÃO. | APL-H21 |
| Recurso | Resistência à corrosão, resistente ao calor, resistente a ácidos e álcalis, à prova de fogo, à prova de explosão |
| Tipo de capuz | Padrão |
| Cor | Cinza |
| Personalizado | Personalizado |
| Doença | Novo |
| Potência de entrada | 110V-240V |
| Filtro | 370*395*50mm |
| Aplicativo | Meio Ambiente/Instituto/Laboratório de Biologia/Laboratório Químico |
| Velocidade facial | 0,4-0,6 m/s |
| Material do forro | Placa de fibra cerâmica |
| Faixa | Vidro temperado |
| Bancada | Cerâmica 20+6 mm |
| Nome do Produto | Exaustor sem dutos |
| Pacote de Transporte | Embalagem padrão de caixa de madeira para exportação |
| Especificação | 1600*620*1245 milímetro |
| Marca comercial | Amplo |
| Origem | Chengdu, China |
| Código HS | 8414809090 |
| Capacidade de produção | 200 conjuntos/mês |
embalagem e entrega
Tamanho do pacote 1900,00cm * 900,00cm * 2100,00cm Peso bruto do pacote 360,000kg100 °F) impose a fire hazard when stored/used improperly. The most common fume hood safety hazards that arise in laboratories stem from cluttered workstations, improper chemical storage, chemical fume hood incompatibility, and failure to check the hood flow indicator to make sure that it is working properly before starting work. brWhen choosing a ducted or ductless system, it is important to get all of the necessary components to maintain good lab practices. Cabinets are available for regular, solvent (flammable and combustible), and corrosive (acids or bases) storage. Some cabinets are designed without a bottom for easy access to equipment that can be rolled into and out of the cabinet. If storage is not necessary, simple base stands or carts (for portable hoods) are available to elevate and support the hood and work surface.brWork surfaces vary in composition, abrasion, chemical, and heat resistance. Solid epoxy resin work surfaces provide the highest-level resistance, allowing users to perform tasks with high concentrations of solvents, acids, and bases. Solid phenolic resin stations are intended for high chemical resistance, but are not as hard and durable as epoxy stations. Stations made of composite resin provide the least amount of chemical resistance and are intended for general use only. Stainless steel work surfaces are also available for perchloric acid and radioisotope fume hoods, both of which require ducted exhaust.br All work surfaces can be purchased with or without spill containment for extra protection, and with cutouts for cup or trough sinks. However, the more plumbing that a hood requires, the less feasible portability becomes. Sinks would likely be plumbed to acid waste systems, and if gas, compressed air, N2, or vacuum turrets are necessary, then disconnecting and reconnecting the unit to move it becomes more of a bother./pProduct Parameters table>|
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Português
English
Français
Deutsch
Español
Italiano
日本語
한국어
Русский
